| slovo | definícia |
inline
(mass) | inline
- v rade za sebou |
| | podobné slovo | definícia |
inline
(mass) | inline
- v rade za sebou |
in-line skate
(encz) | in-line skate,jednořadé kolečkové brusle n: luke |
in-line skating
(encz) | in-line skating,jízda na jednořadých kolečkových bruslích v: luke |
mainline
(gcide) | mainline \main"line`\ (m[=a]n"l[imac]n`) v. t.
1. to inject (illegal drugs) into the vein; as, he preferred
to mainline heroin rather than sniff coke.
[WordNet 1.5] |
Ungainliness
(gcide) | Ungainliness \Un*gain"li*ness\, n.
The state or quality of being ungainly; awkwardness.
[1913 Webster] |
in-line skate
(wn) | in-line skate
n 1: a shoe with a line of rollers fixed to the sole |
dual in-line
(foldoc) | Dual In-Line
Dual In-Line Package.
|
dual in-line memory module
(foldoc) | Dual In-line Memory Module
Small circuit boards carrying memory {integrated
circuits}, with signal and power pins on both sides of the
board, in contrast to single-in-line memory modules (SIMM).
The individual gold or lead connectors (pins) on SIMMs,
although they are on both sides of the chip, are connected to
the same memory chip, while on a DIMM, the connections on each
side of the module connect to different chips. This allows
for a wider data path, as more modules can be accessed at
once. DIMM pins are arranged in a zigzag design to allow PCB
tracks to pass between them.
The 8-byte DIMM format with dual-sided contacts can
accommodate 4- and 16-megabit dynamic RAM chips, and is
predicted to handle 64- and 256-Mbit devices. The 8-byte DIMM
will hold up to 32 megabytes of memory using 16-Mbit DRAMs,
but with the 256-Mbit future-generation DRAM, it will be able
to hold a 64-Mx64 configuration. Another variation, the
72-pin SO-DIMM, is designed to connect directly to 32 bit
data buses, and is intended for use in memory-expansion
applications in notebook computers.
A Dual in-line memory module (DIMM), as opposed to SIMMs (used
by the majority of the PC industry) allows for a 128-bit data
path by interleaving memory on alternating memory access
cycles. SIMMs on the other hand, have a 64-bit data path.
Suppliers are unanimous in their belief that the DIMM will
eventually replace the SIMM as the market's preferred memory
module.
(1996-01-28)
|
dual in-line package
(foldoc) | Dual In-Line Package
DIL
(DIL, DIP) The most common type of package for
small and medium scale integrated circuits, with up to about
48 pins. The pins hang vertically from the two long edges of
the rectangular package, spaced at intervals of 0.1 inch. The
pins fit through holes in the circuit board to which they are
soldered or into a socket.
[More than 48 pins?]
(1995-02-06)
|
single in-line memory module
(foldoc) | Single In-line Memory Module
(SIMM) A small circuit board or substrate, typically
about 10cm x 2cm, with RAM integrated circuits or die on
one or both sides and a single row of pins along one long
edge. Several SIMMs are mounted with their substrates at
right-angles to the main circuit board (the motherboard).
This configuration allows greater packing density than direct
mounting of, e.g. DIL (dual in-line) RAM packages on the
motherboard. In 1993 one SIMM typically held one or four
megabytes, by early 1997 one could hold 8, 16, or 32 MB.
(1997-01-05)
|
|